
EMC
LED Power Supplies
85W
Parameter
Standard
Level
Units
Emissions
Conducted
Radiated
Harmonic Distortion
Flicker and Fluctuation
Immunity
ESD
Radiated RFI
Fast Transients - burst
Surge Immunity
Conducted RFI
Power Freq Magnetic Field
Voltage Dips
Dimming Control
EN55015
EN55015
EN61000-3-2
EN61000-3-3
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
EN61000-4-11
Compliant
Compliant
Compliant
Compliant
Level 4
Level 3
Level 4
Level 4
Compliant
Compliant
Parameter
Min
Nom
Max
Units
Control Voltage (1-10V input
Voltage applied on 1-10V input wire
-2
12
V
Source Current (1-10V input) Source current on 1-10V input wire
0
0.5
mA
Note
Note
Note
Note
Note
A.
B.
C.
D.
E.
If dimming function is not required, dimming wires are to be floating
Primary to Secondary Isolation test not to be carried on power supply.
Load Voltage must be maintained above minimum voltage. See models for voltage range.
Dimming range is 10%-100%
See graphs for Dimming control. If Dimming Signal Voltage is 0-1V, output current is 10% rated current. If Dimming Sgnal
Voltage is 9.5-10V, output current is 100% rated current
Note F.
Note G.
Note H.
See Dimming Implementation diagrams for various dimming methods.
Do not connect GND of Dimming cable to Output.
Class 2 (USR and CNR)except for LXD85-1750SW and LXD85-2000SW which are Class 2 US only.
INPUT / OUTPUT WIRING
INPUT CABLE
SJTW 18AWG 3C
Black (L),White(N), Green (G)650±20mm
MECHANICAL SPECIFICATIONS
OUTPUT CABLE
SJTW 18AWG 2C
Black (-V) and Red (+V) 220±20mm
DIMMING CABLE
SJTW 22AWG 2C
Purple (1-10V), Grey (GND)
177
150
146
350 ± 20
65 ± 5
37
Dimming Control
50 ± 5
50 ± 5
Purple (1-10V)
Grey (GND)
15 ± 2
15±2
50±5
650 ± 20
5
8
10.5
5
164
160
Europe/Asia
Output
220 ± 20
North America
Excelsys Technologies Ltd
27 Eastgate Drive
t: +353 21 4354716
f: +353 21 4354864
Excelsys Technologies
519 Interstate 30, #309
t: (972) 771 4544
f: (972) 421 1805
Eastgate Business Park
Little Island, Cork, Ireland
IRELAND
e: sales@excelsys.com Rockwall, TX 75087
USA
e: salesusa@excelsys.com